Відео

Thank you for the fix and the DIY my Man !

What size socket did you use christ you suck at this

Just pull up the tab and the wire will pop right out is the funniest joke I've heard in my life........

Skipped the reinstallation of the new components.

Best commercial ever! 🐊🏌️‍♂️⛳️🦅🇺🇲

Awesomeness

These videos do not need your radio playing while you talk!

This spider is really in the way!

What to do if this brand cigar cutter is no longer sharp?

Did I miss where you removed and replaced the oil filter?

Thank You, nice job

Any suggestions on a Cannon gun sfe that seems to be unlocking the handle turns but safe won't open something inside seems to be jammed. It may be overfull blocking mechanism.

thanks so much for posting this, like many of the others, i couldn't figure out how to open this to clean all the accumulated dust out of it-all clean now-yay!

“Couldn’t” or “could not care less”

Aside from the three size 20 torx screws mounting the gem case to the fuse block, are there any other fasteners? Do i need to open the GEM and unscrew anything, i cant get the GEM to separate from the fuse block, dont want to force it. Nothing wrong with my GEM, except for what's wrong with all of them. I have a 2001, and the stupid buzzer when im listening to the radio and have doors open is annoying. The black wire with a pink tracer on the ignition switch is already been cut buy a previous owner. But when you turn the ignition to ACC with a door open it's buzzing. I'm going to reverse engineer the Buzzer circuit in the GEM. And disable it for the ignition, but keep the headlight buzzer. Or i might mount a buzzer on/off switch in the headlight/dome light assembly. if I'm not mistaken the buzzer is on the bottom of the gem circuit board. (After i got the fuse block and gem out, I realized, it would have been way faster to just add a new power switch on the dash and run a 12v wire to the radio so i can listen to it with doors open and ignition off.)

Thanks for the help o/

Yak yak like a girl.

Why not just send it back? Doesn't this cutter have a lifetime warranty?

Video is still helpful! Our bathroom walls were getting so wet when taking a hot shower; ok I was the only one causing that because I take stupidly long and dangerously hot showers. Anyway! It was smothered in dust, so I took it off (thanks to your video for showing me how), cleaned it, and am hoping that helps. If not, now I know how to replace it!

Did you end up posting the front end replacement video? I would very much like to see it.

Always clean the breechface up side down to prevent solvent and debris from entering the firing pin channel. Around 80% of videos on cleaning and lubrication of firearms are incorrect!

Question;What happens if I just replace that safety positive cable ,but not fix the blowout airbag(crash in my car),?,Ther is no possibility of that safety positive cable blowout again?.Thanks in advance for your response.

Question;What happens if I just replace that safety positive cable ,but not fix the blowout airbag(crash in my car),?,Ther is no possibility of that safety positive cable blowout again?.Thanks in advance for your response.

Just what I needed, thank you!

I was watching until I saw Crocs.

Nice video - I've had some issues with my keypad here and there - having to enter the combo multiple times, having it stick and not open - that kind of thing. It's nice to know that if things start to get worse, I can do a DIY fix - the SG keypads are actually fairly reasonably priced.

Hahahahaha..."Why don’t you try reading the rules Shankapotomus?" I'm stealing this for the Pickleball courts!

After years of using a different brand chainsaw exclusively, I was taken aback at how different the Husqvarna was. One of the better tutorials I've seen; concise, thorough, and linear. Thank you.

0:02-0:08: Is it really because his 401(k) is tanking, or is he just unable to accept the fact that he lost to a baby?

is the process the same on a Beretta?

Some years ago a movie theatre played an e-trade spot of about 5 of these baby commercials in a row. The audience was in stitches- this was one of the spots. Immediately followed by the "Coming Attractions". Ohhhh....the Boos were being shouted out from every corner. And a great collective groan could be heard. These do look good on the big screen. I hope that baby made bank during his short career.

Iit has batteries and it locked itself and I cannot unlock it how can I need help

Sentry safe

What is the part number fir the larger and smaller door?

Another way to check the chamber is to pull the slide back. Also there is a loaded chamber indicator on top. That piece of plastic is relatively useless.

reconnection is a challenge, and with grease, and soap, and swearing still could not get it done in 3 hours! perhaps an offbrand replacement of radiator but the hose rubs the wheelwell and will not advance.. must be a tool that pulls them together maybe like a gear puller?

Ich danke dir du bist der bester meine Airbag Lampe ist endlich weg 🫶

Awesome video my friend! Thanks for your heard work and documenting your discovery for us! 🙏🏽😅

What type of grease did you use on the o rings?

Did you find a way to secure erase the factory SSD?

I did it without removing the heater hoses. I got the control valve out by pushing the end of it towards the front of the car and simultaneously push with your other hand towards the driver side to get it out of its slot

Do you know model of old one, I have very similar from mid 90s and want to replace just fan.

So what if your oil is not - at all? I left my car running all night and the check engine light came on.

I own a 2008 Accord V6 3.5 EX-L with 166k miles. I have been fighting with the 3497 code (no 3400) for a couple of years now. I changed the whole VVT with a Dorman and still get the 3497. I was always also getting codes on sparks 4 and 5, now extending to 2 and 3 and even the P0300 Random Misfiring. Although I know the P3497 is an oil issue, I related to the spark issue since 4 and 5 are on Bank 2 and closest to the VVT. Although I am not getting a code for the Bank One oil sensor, now I am suspecting it and checking it tomorrow. I just had a new oil change but will again check oil level. My mechanic recommended "reprogramming" my car´s computer for $400, OR... checking the "rockers", starting at $2,000 for the job. I took my car back home and discovered other things in my car like: faulty oxygen sensors (4), faulty coils (6) and sparks that Autozone sold me as "pre gauged" and were not. In the process of changing the 4 sensors with new coils (6) and a set of new sparks (6). I also believe code 3497 should be a RECALL.

This video sucks

Would that vaccum leak make your car misfire?

Thank you friend, very helpful

Does Is that blue label oil cleaner smell strong potent?

Hello. This video is very useful. I'm thinking about trying it on my 2009 BMW 328i. My question is - what year BMW was the car in the video? I'm trying to figure out if the cable I need is the same as yours or not.

10 yr old gem of a video! Thank you